Product Center

Topping is a lightweight formulation that has been engineered to offer superior coverage, ultra-light to mix and apply, ultra-creamy for excellent spreadability, and ultra-easy to sand for an ultra-smooth finish.

Insulated decorative panels are a new type of building material that combines thermal insulation and decorative functions, and their use in the construction industry has become increasingly widespread in recent years. Manufactured by bonding insulation materials to decorative panels through a specialized process, these panels effectively enhance a building’s thermal performance and aesthetic appeal.

This product is made of excellent inorganic mineral gelling materials, siliceous materials and high molecular polymers as the main base materials, and is compounded with a variety of additives through a unique production process. It can be used by adding water and stirring on site. It is a polymer modified mortar with high water retention rate, high strength, high adhesion and good anti-sagging properties.

This product is made of excellent semi-hydrated gypsum, inorganic gelling materials and a variety of polymer additives as the main base materials, mixed with excellent fillers. It is a new, green and environmentally friendly floor engineering material. It can widely replace traditional cement mortar and fine stone concrete leveling. One-time leveling can meet the construction requirements of the required decorative surface layer, and can achieve self-leveling and precise leveling of the ground, with high comprehensive cost performance.

This product is made of excellent inorganic gelling materials and refined aggregates as the main base materials, compounded with a variety of imported additives through a unique production process. It can be used by adding water and stirring on site. It is a polymer modified mortar that is easy to construct, highly resistant to sagging, and has high bonding strength.

It is a fine porous aerated concrete board made of ground quartz sand (fly ash, river sand and other siliceous materials), cement, lime and gypsum as the main raw materials, and aluminum powder as the foaming agent. It is made through batching, pulping, pouring, meshing, pre-curing, cutting, and curing (10h~12h) under high temperature (180°℃~200°℃) and high pressure (10~12 standard atmospheres).

Base Coats are a setting type jointing compound that provides superior tape adhesion and joint strength. They are used for the first and second coat in a three-coat jointing system, along with jointing tapes. Base Coats are available in powder form and are mixed with water to a workable paste.